MPXV5004DP Pressure Sensor

MPXV5004DPis a monolithic silicon pressure sensor from Freescale semiconductor that is a highly sensitive implanted straingauge. It uses advanced micromachining techniques, bipolar processing, thin-film metallization, useful for accurate pressure sensing. The pressure range provided by this sensor is 3.92 kPa at 400mm H₂O. It works with a nominal 4.75V to a maximum of 5.25 VDC supply voltage. However, it typically works with 5.0V DC voltage and requires a maximum of 10mAdc current. The sensitivity is 1.0V/kPa.

It provides an accuracy of ±1.5 %VFSS with autozero up to 100 mm H₂O and ±2.5 %VFSS with autozero from 100 to 400 mm H₂O, and ±6.25 %VFSS without autozero from 0 to 400 mm H₂O.

MPXV5004DP Sensor Pinout Configuration

Pin Number	Pin Name	Description
1	DNC	Do not connect to supply or GND
2	Vs	Voltage Supply
3	GND	GND
4	Vout	Output voltage
5	DNC	Do not connect to supply or GND
6	DNC	Do not connect to supply or GND
7	DNC	Do not connect to supply or GND
8	DNC	Do not connect to supply or GND

Features and Specifications

• Range: 0-3.92 kPa Range
• Accuracy: ±1.5 %VFSS with autozero up to 100 mm H₂O and±2.5 %VFSS with autozero from 100 to 400 mm H₂O, and ±6.25 %VFSS without autozero from 0 to 400 mm H₂O.
• Operating Voltage: 4.75V - 5.25V(5.0V TYP)
• Supply current: 10 mAdc (MAX)
• Maximum pressure: 16 kPa
• Sensitivity: 1.0V/kPa

Note: Complete technical details can be found in theMPXV5004DPDatasheetlinked at the bottom of this page.

Alternatives

Replacement of this MPXV5004DP Pressure Sensor-

1. SPD100G
2. MPS20N0040D
3. 24PCEFA6G

Other Pressure Sensor

MPX5010dp

MPXV5004DP Pressure Sensor - Overview

The pressure sensor is made using a Thermoplastic case. It uses differential sensing elements that are isolated from the environment by Flurorosilicone gel. It has an internal circuit that uses thin-film temperature compensation and calibration circuitry to calibrate the sensor automatically. Below images are showing theOutput vs pressure differentialwith and without autozero.

MPXV50004DP Interfacing Diagram

The pressure sensor is designed for microprocessors ormicrocontrollersthat have ADC (Analog to Digital Converter)。它提供了输出电压成比例with the pressure sensed by the sensor.

However, proper power supply decoupling of the sensor is also required. The below image is providing a detailed interfacing diagram with any microcontroller unit that has the ADC features inbuilt.If ADC is not available, one can use anexternal ADC ICto convert the analog data into digital formats.

In the above image, threedecoupling capacitorsare used. Out of these three, two are used in the power line and the other one is used in the output.

Applications

• Washing machines
• Pressure sensor-based microprocessor and microcontroller projects
• Liquid pressure measurement
• Liquid level measurement
• Respiratory applications
• Industrial Water level sensing

2D and Dimensions