SSL5015TE LED Driver IC
TheSSL5015TEis a high voltageCompact non-dimmableLED driver ICwith an integrated MOSFET for driving LED lamps in general mains non-dimmable lighting applications. The IC is dedicated to 100 V (AC) or 120 V (AC) input applications.
Pin Description ofSSL5015TE IC
Pin Number |
Pin Name |
Description |
1 |
HV |
High-Voltage Supply Pin |
2 |
SOURCE1 |
Internal MOSFET Source |
3 |
SOURCE1 |
Current Sensing Source |
4 |
VCC |
Supply Voltage |
5 |
NTC |
LED Temperature Protection Input |
6 |
DVDT |
Capacitor Switching Supply Pin |
7 |
GND |
Ground pin |
8 |
DRAIN |
Internal MOSFET Drain |
Specifications & Features ofSSL5015TE:
- Operating Voltage: 8V to 15V
- Current - Output / Channel: 2A
- Output Voltage: 300V
- Conversion Frequency: 100 kHz
- Undervoltage LockOut (UVLO)
- Leading-Edge Blanking (LEB)
- No Schottky diode required due to ZCS
- Available in 8-Pin SOIC package
Note:Complete Technical Details can be found at the SSL5015TE datasheet given at the end of this page.
Other Display Driver IC:LM3914,LM3915,MAX7219
Where to Use SSL5015TE LED Driver IC
The SSL5015TE is mainly used for low-cost mains non-dimmable LED lighting applications, including 18 W T-LEDs or higher power lamps, with a high power factor. The IC operates from 100 V (AC) or 120 V (AC) mains voltage. The output current can be modulated using a PWM signal.
How to Use SSL5015TE LED Driver IC
SSL5015TE is a BCM, peak current controlled system that operates at the boundary between continuous and discontinuous modes.A basic application diagram from theSSL5015TE datasheetis given below.
Inductor L is used to store the energy when MOSFET is turned on. The Drain current from the MOSFET is fed back to the sensing elements to maintain the stability of the upcoming output current. RSENSEresistor connected to the SOURCE pin is used to sense the current. The peak current sensed at the SOURCE2 pin determines when the MOSFET is switched off.When the internal MOSFET switches off, the current flows through the freewheeling diode and the output capacitor.
Applications of SSL5015TE
- LED Bulb, Spot Light
- PAR30, PAR38 LED Lamp
- T8/T10 LED String
- Other LED Lighting
2D Model of SSL5015TE
Dimensions for SSL5015TE IC is given below. These dimensions are for theSOIC-8package. If you are using different package IC please refer to the SSL5015TE datasheet.
